VIVANT ALTERNATE is the first dry herb vaporizer with replaceable 18650 batteries in the market. It also features an industry first airflow control to customize your vaping experience with precise temperature control.


  • Full convection hot air system
  • High efficiency heat exchanger
  • Removable and rechargeable 18650 battery
  • Super precise temperature control
  • Automatic off feature
  • Airflow control with reverse flow protection
  • OLED display


After learning about the brief introduction of Vivant ALTERNATE, let’s begin to know how to use it?

In addition, there is a flash sale started from 6/9 to 6/10, save 50% off to get ALTERNATE!

flash sale 50% OFF   

1. Install 18650 battery in proper position. Be mindful of the positive and negative side. You can also charge the device with a 1 amp charger via micro USB port on the unit.

Replaceable 18650 battery

     2. Open chamber by twisting top cap counter clockwise. Load your material      without over pack. This will cause a reduction in airflow.

Load material

     3. Press the power button 5 times to turn on the ALTERNATE. Choose your desired temperature by using the up and down buttons.

      4. Press and hold the power button for 2 seconds until the LED light turns from red to green.

Getting started with vivant alternate

How to adjust the airflow?

Raise or push the airflow adjuster to control the amount of air taken into the device.

airflow adjustment

How to adjust buzzer?

In power-off state, long press the on/off button and up button to enter buzzer adjustment interface. Press two regulatory buttons to adjust buzzer volume from 1 to 5. You may press the on/off button to confirm after adjustment. You may switch to silent mode by pressing the down button when the volume is 1.

buzzer adjustment

How to set stealth mode?

When the device is on, press the fire button and down button simultaneously to switch between stealth on and off.

stealth mode set

How to set countdown?

During the 60 seconds countdown period after heating, you can press the two regulatory buttons simultaneously to restart the countdown process.

heating time countdown set


For more details on how to use Vivant ALTERNATE, you can visit the user manual on our website.


Leave a comment